Call Us Today: 800-207-6812 | Email: sales@midcarolinasupply.com
Products

QUICK QUESTION
Name :
Email :
Phone Number :
Question :
series c filter chambers

Filter Cartridge Chambers Style 3C

The most economical of filter chambers, this single cartridge unit will accommodate 6”, 10”, 20”, or 30” length cartridges. 10” cartridges may not be stacked inside a 20” or 30” chamber because there is no center rod. Because of the unique cartridge compressor design, this chamber can accept a cartridge length variance of 1/4” without any liquid by-pass. The special top knife edge moves up and down with the filter cartridge length. There are no longer any center rods protruding through the chamber top to break or stretch, and the top is now threaded onto the shell via an acme thread configuration. The inlet and outlet ports have been increased from 1/2” MPT to 3/4” FPT connections as well as the chamber diameter in order to increase the filtration flow rate and to eliminate the possibility of broken MPT inlet/outlet connections. A base is included for surface mounting. Our series CN includes a B-mount bracket for mounting the chamber on a tank lip without a base for minimal space requirements. This chamber can accept the DOE, double open end - flat cartridge configuration only.

View More


Filter Cartridge Chambers Style 4C

This heavy-duty single cartridge chamber will accommodate 10”, 20” or 30” length filter cartridges. Because of the internal rod design, this chamber can accept filter cartridge lengths ±1/4” without liquid bypass. The 4C chamber can accommodate non-standard cartridge lengths with more than the 1/4” length from standard by adjustment of the internal rod length; consult the factory for details. The special head is threaded onto the shell via a Dardelet, self-locking thread configuration. The larger 1” FPT inlet/outlet connections and 4” chamber diameter allow for increased filtration flow rates, especially for larger O.D. sub-micronic cartridges (2.50”-2.90” O.D.), while also eliminating the possibility of broken MPT connections. These chambers can accept the standard DOE - flat or optional SOE - #222 configuration.

View More


Filter Cartridge Chambers Style 6C/8C/12C

These three filter chambers incorporate heavy reinforced ribbing within the molded parts. The double labyrinth O-ring sealing and the long-sleeved flanges, top and bottom, provide added strength and improved o-ring sealing while also eliminating the use of external frame rods. The simplicity in design and accessibility allow one to completely disassemble and reassemble these chambers in order to replace any broken or damaged part. These chambers can also be converted in the field from DOE - flat configuration to a bulk carbon treatment unit or to accept SOE - #222 sub-micronic cartridges with only a small modification. These simple conversion processes eliminate the expense of purchasing a completely new chamber.

View More


Dual Filter Cartridge Chambers Style 6C/8C/12C

These three filter chambers incorporate heavy reinforced ribbing within the molded parts. The double labyrinth O-ring sealing and the long-sleeved flanges, top and bottom, provide added strength and improved o-ring sealing while also eliminating the use of external frame rods. The simplicity in design and accessibility allow one to completely disassemble and reassemble these chambers in order to replace any broken or damaged part. These chambers can also be converted in the field from DOE - flat configuration to a bulk carbon treatment unit or to accept SOE - #222 sub-micronic cartridges with only a small modification. These simple conversion processes eliminate the expense of purchasing a completely new chamber.

View More